Best Flanges Manufacturer In India
Metalica
Forging Inc., is Flange’s maker based in Mumbai, India. Our
high-quality Flanges are specifically developed for a variety of piping
applications in a variety of industries, including steel mills, chemical
plants, petrochemical plants, fire safety systems, and so on.
Types of Flanges
1. Spectacle Flanges
Blind flanges are similar to Spectacle blind flanges, but they vary in
that they match between two flanges. The name Spectacle Blind comes from their
resemblance to a pair of eyeglasses. When one end of the Spectacle Blind Flange
is completely closed for full flow, the other end remains open for full flow.
2. Blind Flanges
As seen below, a blind flange is a solid flange. These are used to cover
a segment of pipe or a nozzle on a vessel that isn't in use. For these blinds,
the best practice is to use a regular gasket. Blind flanges can be lifted face
(RF) or flat faced, much like ordinary pipe flanges (FF). If the flange is RF,
a regular ring gasket suitable for operation and/or testing should be used.
3. Slip on Flanges
So, slip on flange is a type of slip-on flange. It's a kind of flange
that slips over the pipe and has a slightly larger internal design than the
pipe. The SO flange can be directly attached to machinery or tubing by fillet
welding at the top and bottom of the flange since the inner diameter of the
flange is significantly greater than the outer diameter of the pipe.
4. Ring Joint Flanges
A Ring Style Joint Flange is a type of flange that seals the flange pair
with a metal ring that sits in a hexagonal groove. When the bolts are tightened
and the gasket is squeezed into the groove, the flanges close, forming a
metal-to-metal seal. The groove is normally machined into the face of an RTJ
flange, which has a raised face.
5. Orifice Flanges
The flow of the fluid transmitted by the pipeline is determined by an
orifice flange by a flow nozzle located on the flange itself. The orifice
flange is machined with pairs of pressure tapping’s, eliminating the need for
separate tapping’s on the pipe surface. A pair of flanges, an orifice plate,
bolts, nuts, gaskets, jacking pins, and plugs make up the standard orifice
flange assembly. The primary flow factor is easily removed thanks to jacking
screws.
6. Industrial Flanges
Welded Flanges, Blind Flanges, and Weld Neck Flanges are among the
Industrial Flanges that our business has developed experience in manufacturing
and supplying. Thanks to their multifunctional output capability, these flanges
are commonly used in a variety of industries. These have excellent technical
standards and are produced by highly skilled professionals.
7. Socket weld Flanges
Metalica Forging Inc is Smaller diameter high-pressure pipes are normally
fitted with socket-weld valve flanges. Inserting the pipe into the socket end
and adding fillet weld over the surface is how these pipe flanges are
connected. This results in a smooth bore and improved fluid or gas flow within
the tubing.
8. Threaded Flanges
Threaded flanges, threaded pipe flanges, and stainless-steel threaded
flanges are among our most popular products. These specific flanges are
commonly used in high-pressure, small-diameter applications. The ability to
assemble these flanges without welding is their defining characteristic.
9. Reducing Flanges
A reducing flange is a flange of a single diameter that has a narrower
bore and diameter. It is used in piping systems to adjust the diameters. JF
Engineering offers ANSI/ASME B16.5 Reducing Flanges in a variety of grades,
fabrics, sizes, and configurations.
More details
about Flanges manufacturer then you can visit: -
Comments
Post a Comment